“THUNDERBOLT SERIES”
Thunderbolt Steam Boilers has 160 kg / h – 800 kg / h steam production capacity / 3 – 8 bar operating pressure. Our company is EKOTEK, Trademark registered and controlled and audited by ISO 9001: 2015 quality management system.
Steam Capacity
160 kg / h – 800 kg / h steam production capacity
Features
Semi cylindrical combustion chamber, 3 pass, automatic loading, CE certificate
Our company is EKOTEK, Trademark registered and controlled and audited by ISO 9001: 2015 quality management system.
• Module b (project) + module f (manufacturing) for each product is certified according to TSE Standard with CE certificate.
• Ultrasonic, radiographic and penetrating tests are carried out by our authorized company.
• Welding operations are carried out by certified welders in accordance with approved WPS and WPQR. Welding processes are subjected to radiographic testing at the rates stipulated by the standards.
• The products used in production are all certified materials.
• Our products are produced in accordance with 12953-2 Standard and 2014/68 / EU Pressure Vessels Directive and have CE certificate.
• Our products are manufactured according to EN288, EN287-1 using P 265 GH and P 355 GH quality boiler sheet.
• Our products are produced using boiler pipes made of steel of higher quality, P235GH in TS EN 10217-2 norm.
• Boiler pipes are pipes that have undergone normalization (strain relief annealing) annealing.
• THE QUALITY OF THE STEAM BOILER IS QUALITY OF THE FEED WATER.When purchasing a steam boiler, the manufacturing quality of the boiler, the pressure tests performed after the production and the operating efficiency are emphasized. However, the lifetime of this boiler, its operational efficiency and the purity of the steam it produces is far from the
• Manufacturing quality of the boiler.It is directly proportional to the purity of the water. For this reason, it is necessary to act very knowledgeable in the preparation of the boiler feed water and the devices required for the preparation of the feed water should be selected very carefully and then operated with the same diligence. Most of the problems in the operation of the boiler (boiler and condensate system) are related to the chemical quality of the water supplied to the boiler and called “feed water”. The problems of the operator who belittles the chemistry of the feed water and underestimate this feature never disappear. For feed water, get support from the treatment companies in your area and our company. When choosing the boiler, annual, monthly and daily steam needs of the enterprise should be taken into consideration. COAL, PRINA, PELLET, SUNFLOWER SHELL, HAZELNUT SHELL etc. Burning granular fuels with high efficiency is also facilitated by automatic loading. If requested, economizer can be added to the flue gas outlet in order to benefit from the heat of smoke gases. The economizer to be mounted on the back of the boiler allows the condensate entering the boiler to be heated and back into the boiler. Thus, fuel saving is provided.
• It has the flexibility to work compatible with different combustion systems. • Our boilers are designed for minimum 4.500 kcal / h fuel. Contact our company to burn lower calorie fuel.
Large volume with water and steam and high performance and sudden intense steam output in continuous operation conditions.
• With its high heating surface, it provides the opportunity to obtain drier and higher energy vapor.
• It offers comfortable and high efficiency combustion performance with low back pressure values.
• It distributes the heat obtained with its 3-pass design evenly on all surfaces and provides maximum heat transfer and fuel saving.
• Fuel supply is from the bottom and the flame is directly contacted to the furnace.
• Our products do not cause noise pollution with their silent operation.
• Primer sent air with the help of fan; provides a controlled and clean smokeless combustion.
• Design and Manufacturing upper pressure limit of Semi Cylindrical Steam Boilers is determined as 8 Bar; In order to meet customer expectations, it can be manufactured by increasing the production capacity range appropriate for the need.
• OUR COMPANY PROVIDES USING AUTOMATIC BOTTOM BLUFF AND SURFACE BLUFF IN THE SYSTEM.
• (MANUAL BLUFF ARE AVAILABLE IN PACKAGE SYSTEMS)
Semi Cylindrical Low Pressure Steam Boiler Usage Areas;
• In Petrochemical
• Generating electricity in thermal power plants (Steam turbines)
• In pharmaceutical and food industry for sterilization purposes
• Building materials industry
• Steam heating systems (heating installations)
• Refineries
• Chemical processes
• In the food industry
• Sterilization (packaging and food)
• In the fertilizer industry
• In rubber products and manufacturing
• In the construction materials industry
• Paper industry
• Wood processing and shaping
It is used in many places.
GRIM SERIES – SCOTCH TYPE STEAM BOILER